Free delivery on orders of £5 or more
14-Day Full Returns
100% Secure Payments
Blackout Curtain with Flexible Installation – 4 Sizes
£14.00
- Double-layered blackout material, can be cut to fit
- Attaches with self-adhesive Velcro, no drilling or rod
- Storage bag and flexible measuring tape included
on £5 or more
payment
returns
Pay with:
We’re a small independent business – thank you for shopping with us
You might also like
Blackout Curtain With Flexible Installation – 4 Sizes
This blackout curtain for windows is made from a flexible, double-layered material designed to block incoming light. The curtain is available in 100 x 145 cm, 200 x 145 cm, 300 x 145 cm, and 400 x 145 cm. All variants can be cut to fit the shape and size of the window. Installation does not require a curtain rod or drilling.
The curtain is attached at the window with self-adhesive Velcro tape. This allows the material to be taken down when daylight is wanted again and put up as needed. The solution can be used in bedrooms, children’s rooms, living areas, by skylights, and as temporary screening.
The removable installation makes the solution practical in rental properties, during travel, and in rooms where the screening is only used for periods.
Key Benefits
- Opaque material designed for effective light blocking.
- Available in four sizes from 100 x 145 to 400 x 145 cm.
- Can be cut to fit standard and irregular window shapes.
- Installed without screws, drilling, or traditional curtain rods.
- Self-adhesive Velcro tape makes the curtain removable.
- Double-layered material provides screening at the window surface.
- Can be folded and stored in the included bag.
- Flexible measuring tape included for measuring the window.
Light Blocking at the Window
The material is described as fully blackout, but the overall result also depends on the installation. To limit light along the edges, the curtain should overlap the entire glass area and preferably part of the window frame. Small openings around corners or attachment points can allow light to seep in.
The flexible construction allows the curtain to be adapted to both standard windows and special shapes. The product material shows square, curved, and angled cutouts. Therefore, the curtain can be used where ready-made curtains do not fit directly to the window’s measurements.
Thermal Screening
The double-layered material is designed to create an additional barrier at the window surface. The product material describes protection against sunlight and UV exposure as well as reduced heat gain. The actual thermal effect varies according to window type, sun direction, installation, overlap, and the room’s overall insulation.
The curtain does not replace insulating glass or fixed sun screening but can be used as an additional screening layer. It is useful in rooms where less direct light is wanted during certain periods, without the need for a permanent curtain solution.
Cutting and Flexible Installation
Measure the window before selecting a size and cutting the material. Please add overlap around the glass area to reduce the risk of light openings. Mark the desired shape on the curtain and cut along the marking with suitable scissors. Check the fit before attaching the self-adhesive parts.
One part of the Velcro tape is attached to a clean, dry, and smooth surface at the window. The other part is placed on the curtain so that the attachment points meet. When the curtain needs to be removed, the Velcro tape is separated while the self-adhesive parts can remain. The suitability of the surface should be checked before installation.
Measurements and Specifications
| Product Type | Cuttable Blackout Curtain |
|---|---|
| Size 1 | 100 x 145 cm |
| Size 2 | 200 x 145 cm |
| Size 3 | 300 x 145 cm |
| Size 4 | 400 x 145 cm |
| Construction | Double-layered Blackout Material |
| Installation | Self-adhesive Velcro Tape |
| Adjustment | Can be cut to fit the window’s measurements |
| Usage | Windows, doors, and skylights |
| Maintenance | The curtain part is described as machine washable |
| Fixed Hanging | Does not require a curtain rod or drilling |
How to Install the Blackout Curtain
- Measure the window with the included measuring tape.
- Select a size with sufficient overlap.
- Mark the measurements and cut the curtain to size with scissors.
- Thoroughly clean and dry the mounting surface.
- Place the self-adhesive Velcro tape around the window.
- Attach the curtain and check the edges for light openings.
Maintenance and Package Contents
The product material describes the curtain part as machine washable. Remove the mounting parts before washing if the instructions require it, and allow the material to dry completely before reinstallation. Avoid damaging the cut edge during washing and storage.
The package includes 1 blackout curtain in the chosen size, self-adhesive Velcro tape, a flexible measuring tape, and a storage bag. Compare the window’s measurements with the four sizes before ordering and cutting.
