Tap Extender With Flexible Neck And 360° Rotation

This tap extender is mounted on the end of a compatible tap and provides greater reach at the sink. The long, flexible neck can be bent and turned, allowing the water stream to be directed more easily towards different areas in the kitchen sink, bathroom sink, or utility room.

The model measures approximately 14-16.1 cm in length and features a swivel spray head with 360 degrees of movement. The outlet can switch between a concentrated water stream and a wider shower function, allowing the water flow to be adapted for different tasks at the sink.

Key Benefits

• Flexible neck provides extra reach from the tap’s outlet.
• 360-degree movement allows for directing water around the sink.
• Two spray types for regular rinsing and a wider shower function.
• Aerating outlet provides a smooth water flow during daily use.
• Fits compatible taps with M22 or M24 threads.
• Can be used at kitchen sinks, bathroom sinks, and in utility rooms.
• Installs on the existing tap without replacing the entire fixture.

Overview

This flexible tap extender is designed for situations where the existing spout does not reach far enough into the sink. The metal neck can be shaped in the desired direction, while the swivel head provides additional control over the water stream.

The spray head is changed by pulling or pushing the lower part, allowing you to choose between a concentrated stream and a more dispersed shower function.

Dimensions And Specifications

The supplier’s material shows both approximately 14 cm and 16.1 cm as the length for the model. The length is therefore indicated as a range. There may also be slight variations due to manual measurement.

Two Spray Types For Different Tasks

The concentrated stream is suitable for regular water filling, hand washing, and targeted rinsing. The shower function distributes water over a wider area and can be useful when larger parts of the sink or multiple items need rinsing.

Switch between functions while the water pressure is moderate. The strength of the water flow depends on the installation and the household’s water pressure.

How To Install The Tap Extender

1. Unscrew the existing aerator or spray collector from the tap.
2. Check if the tap has M22 or M24 threads.
3. Place a suitable washer at the connection.
4. Screw the extender directly onto the thread by hand.
5. Slowly turn on the water and check the connection for leaks.
6. Retighten gently if water seeps at the thread.

Compatibility depends on the tap’s thread and design. Measure or check the thread type before ordering. An additional adapter may be necessary if the tap uses a different thread than M22 or M24.

Flexible Control Of The Water Stream

The long neck can be bent so that the spray head is positioned closer to the area to be rinsed. Move the neck gently and avoid sharp bends or excessive strain. The product should not be used as a handle or support point.

After adjustment, the head can be rotated to fine-tune the direction. This allows for rinsing corners and sides of the sink without unnecessarily moving larger items.

Cleaning And Maintenance

Unscrew the extender if necessary, and rinse the filter area for limescale and impurities. Wipe the surface with a soft cloth and a mild cleaning agent. Avoid abrasive sponges, strong chemicals, and tools that may damage threads or surfaces.

Regularly check the washer and threads, especially if the connection starts to drip or the water stream becomes uneven. Replace a worn washer before continuing to use the product.

Extra Reach At The Sink

This tap extender with flexible neck provides a simple way to increase reach and control the water stream more precisely. The combination of 360-degree movement, two spray types, and compatibility with M22 and M24 threads makes the model practical for everyday tasks at the sink.