Kerb Ramps With Non-Slip Surface – 2 Pcs.

This set of portable kerb ramps consists of two ramps for low edges, small steps, and level differences. The sloping shape creates a smoother transition, allowing wheels to be easily guided up or down. The ramps can be used at driveways, garages, workshops, and other places where a low edge makes passage difficult. The construction makes them simple to place, move, and store after use.

Key Benefits

• Set of two separate ramps that can be placed at an appropriate distance.
• Non-slip surface structure provides better contact for wheels during passage.
• Reinforced underside contributes to a stable and shape-retaining construction.
• Suitable for low kerbs, door thresholds, and small level differences.
• Integrated mounting holes allow for additional fastening.
• Portable design that is easy to move and store.

Overview

These kerb ramps are developed as a transition between two surfaces of different heights. Each ramp has a wide, sloping driving surface with a raised pattern that helps create contact between the ramp and the wheel. The low front edge makes it easier to begin the crossing, while the higher back edge is placed close to the edge.

The two ramps can be positioned according to the distance between the wheels of the equipment that needs to pass. They can, for example, be used for car wheels at a low edge, motorcycles, scooters, bicycles, wheelbarrows, and transport carts. They can also create an easier transition for pets when a low level difference is difficult to pass.

Non-Slip and Reinforced Construction

The surface is designed with repeated, raised areas. The structure increases friction and helps reduce the risk of wheels slipping on a completely smooth surface. The underside of the ramp has a reinforced grid design that distributes the load throughout the construction and keeps the product’s weight manageable.

Each ramp has integrated holes for fastening. Therefore, the ramps can be used loosely or mounted with suitable screws and brackets. Fastening materials should be chosen according to the substrate. For portable use, the ramps should be checked before each passage to ensure they are level and cannot move.

Dimensions and Placement

Each ramp measures approximately 50 × 27 × 5 cm. The height of around 5 cm makes the set suitable for low edges and small steps. Always measure the level difference before use, and check that the top edge of the ramp is close to the surface to be crossed.

Place the ramps on a firm, flat, and clean surface. Remove loose stones, sand, oil, and other materials that may reduce stability. Ensure that both ramps are parallel with the correct distance. Drive slowly and straight over them without sudden accelerations, braking, or sharp turns.

For Vehicles, Equipment, and Daily Access

The set can be used at private driveways, garages, workshops, sheds, and smaller storage areas. The ramps are practical when wheels need to repeatedly pass a low edge, or when equipment needs to be moved between different floor levels.

The product material does not specify a maximum load capacity. Therefore, do not use the ramps for vehicles or machines until you have assessed that the weight, wheel placement, and substrate are suitable for the product. The ramps should not be used as lifting ramps for working under a vehicle. They are also not automatically suitable as wheelchair ramps, as slope, width, and fastening must fit the user and the location.

Cleaning and Storage

Clean the ramps with water, a soft brush, and a mild detergent. Remove oil, mud, and dirt from the surface pattern to maintain grip. Allow them to dry before storage. Regularly check the surface, edges, underside, and mounting holes for cracks or deformation. Stop use if the construction is damaged.

Specifications

Practical Transition at Low Edges

With these non-slip kerb ramps, you get two separate elements that can be placed according to the distance between the wheels and moved as needed. The combination of sloping shape, structured surface, and reinforced underside makes the set practical for controlled passage over low edges. Correct placement and slow passage are crucial for stable use.