Inflatable Car Mattress For The Back Seat With Cushions And Support

This inflatable car mattress transforms the car’s back seat into a more cohesive sleeping surface during breaks, camping trips, and longer journeys. The set consists of an air mattress, a separate support for the area between the seats, and two inflatable cushions. When the parts are deflated, they can be folded and stored compactly in the car, ready for the next trip. The soft, flocked surface provides a comfortable contact area, while the wavy pattern helps distribute air throughout the mattress.

Key Benefits

• Creates a wider and more even sleeping surface on the car’s back seat.
• Inflatable design that can be deflated and folded after use.
• Comes with two separate cushions for flexible support.
• The support piece fills the gap between the back seat and the front seats.
• Soft surface makes the mattress suitable for resting and short breaks.
• Leak-proof valve helps keep air in during use.
• Suitable for many cars, camping, road trips, and temporary resting.

Overview

A standard back seat bench has seams, slopes, and an open area in front of the seat, which can make it difficult to lie comfortably. This inflatable car mattress is designed to cover the seat area and create a more unified base. The separate support is placed in the footwell between the front and back seats and helps support the front part of the mattress.

The mattress measures approximately 135 × 72 cm, while the support piece measures approximately 125 × 35 cm. The two cushions each measure approximately 33 × 22 cm. The specified dimensions allow for comparison of the product with the space in the car before ordering. The width of the back seat, the shape of the seats, and the distance to the front seats vary between car models, so the car’s interior measurements should be checked.

Specifications

For Longer Trips And Planned Breaks

On journeys with many stops, the mattress can be used to create a more comfortable area for relaxation when the car is parked. The two separate cushions can be placed as needed under the head, neck, or legs. The set can also be used as a practical sleeping area during camping, on outings, or in other situations where the back seat needs to be better utilised.

The inflatable construction means that firmness can be adjusted by adding or releasing a little air. The mattress should be filled until it feels stable, without exposing valves or seams to unnecessarily high pressure. A moderate firmness makes it easier for the mattress to adapt to the shape of the back seat.

Inflation And Placement

Unfold all parts and check that the valves are closed and free of dirt. Inflate the mattress, support piece, and cushions separately. Place the support piece in the footwell, and then lay the mattress over the back seat with the wide sleeping surface facing up. Adjust the front seats so that the mattress lies stable without being pinched against sharp edges.

A pump is not documented as part of the set and should therefore be obtained separately if not already available. Use a pump and a valve adapter that fits the product’s valve, and avoid over-inflation.

Compact Storage After Use

Open the valves, gently press the air out, and fold the parts together when they are completely dry. Store the mattress away from sharp objects, tools, and hot surfaces that could damage the material. Clean the surface with a slightly damp cloth and let it dry before packing it away.

The mattress is intended for use in a parked car and should not be used as a seat during driving. It does not replace a seatbelt, car seat, or other approved safety equipment. With proper placement and storage, the set is a flexible solution for car travel, camping, and breaks on the go.