Flexible Holder for Baby Monitor and Camera

This holder for baby monitor allows you to place a camera at a suitable height and angle without drilling holes in the wall. The holder is secured with a clamp on, for example, a cot edge, tabletop, shelf, or other stable edge.

The flexible arm can be bent and rotated, allowing the camera’s direction to be adjusted according to the room’s layout. The adjustable device holder can be used for various baby monitors, surveillance cameras, and mobile phones, as long as the device’s dimensions fit within the holder’s range.

Key Benefits

• Flexible arm that can be bent and adjusted in various directions.
• Mounted with a clamp without screws or drilling.
• Can be attached to cot edges, tabletops, shelves, and other stable edges.
• Allows you to place the camera at a desired height and angle.
• Adjustable device holder with a maximum opening of approximately 9.9 cm.
• Clamp for edges with a thickness of up to approximately 5 cm.
• Flexible arm with a length of approximately 40 cm.
• Suitable for many baby monitors, smaller cameras, and mobile phones.
• Can be moved between different locations without permanent installation.

Overview

This flexible camera holder with clamp is designed for situations where a baby monitor or camera needs to be placed in a specific position. The clamp can be secured to a suitable edge, after which the flexible arm is bent until the camera points towards the desired area.

The approximately 40 cm long arm allows for raising, lowering, and angling the camera without moving the actual mounting clamp. This makes the holder practical in rooms where there is no shelf or furniture placed directly in front of the area to be monitored.

The device holder can open to approximately 9.9 cm and can therefore be used with many common baby monitors, surveillance cameras, and mobile phones. The device’s width, shape, and weight should always be checked before use.

The clamp can be secured to edges with a thickness of up to approximately 5 cm. The contact surfaces help create a stable grip and limit direct contact between the clamp and the mounting surface.

Dimensions and Specifications

Flexible Camera Placement

The bendable arm allows for adjusting the camera’s position according to the room’s layout. The arm can be shaped so that the camera is placed higher, lower, or further out from the mounting point.

Once the desired position is found, it should be checked that the arm is stable and that the weight of the camera does not cause the holder to move. For heavier devices, it may be necessary to use a shorter and less extended position.

Installation Without Drilling

The holder is installed by opening the clamp and securing it to a stable edge. It does not require screws, tools, adhesive, or permanent changes to the wall or furniture.

The clamp solution makes it easy to move the holder between different rooms and locations. For example, it can be moved from a cot edge to a shelf or tabletop when the need changes.

Compatibility

The adjustable holder is suitable for many baby monitors and cameras from brands such as Philips Avent, GHB, Momcozy, ieGeek, and Boifun. It can also be used for various mobile phones.

Compatibility depends on the device’s size, shape, and weight. The device must be able to sit securely in a holder that opens up to approximately 9.9 cm. Therefore, check the dimensions of the camera or phone before use.

The holder can be used for:

• Baby monitors with a separate camera unit.
• Smaller surveillance cameras.
• Mobile phones within the holder’s range.
• Cameras that need to be placed above or beside a specific area.

How to Install the Holder

1. Select a stable edge with a thickness of no more than approximately 5 cm.
2. Open the clamp and place it around the edge.
3. Check that the clamp is secure and cannot slide.
4. Place the camera, baby monitor, or mobile phone in the device holder.
5. Check that the device is centred and securely fastened.
6. Gently bend the arm until the desired height and angle are achieved.
7. Check stability before using the holder.

Safe Placement During Use

The holder must be mounted on a firm and stable surface that can bear the total weight. Regularly check that the clamp is still secure and that the flexible arm has not changed position.

When mounting near a cot, the holder, camera, and any wires should be placed out of the child’s reach. The product should not be placed where it can fall into the cot or where the child can pull on the holder or wire.

The holder is a mounting product and does not replace regular supervision of the child.

Cleaning and Maintenance

Wipe the holder with a dry or slightly damp cloth as needed. Remove the camera or mobile phone before cleaning.

Regularly check the clamp, contact surfaces, and device holder for signs of wear. Avoid overstretching or repeatedly bending the arm sharply at the same spot.

Practical Holder for Baby Monitor and Camera

This flexible holder for baby monitor and camera allows for adjusting the camera’s placement without permanent installation. The combination of a 40 cm flexible arm, adjustable device holder, and clamp for edges up to 5 cm makes it suitable for various rooms and monitoring needs.

Baby monitor, camera, and mobile phone are not included.