Rat Trap With Automatic Door For Live Capture – 30 Cm

This rat trap with automatic door is designed for the live capture of rats, mice, and other rodents of suitable size. The trap functions as a closed cage, where the animal enters to reach the bait and activates the sensitive trigger mechanism. The door then closes, keeping the animal inside the capture chamber.

The construction is made of galvanised metal with perforated sides, which provide ventilation and allow for checking the contents of the trap from the outside. A separate bait chamber makes it easier to place the bait without reaching far into the cage.

The trap measures approximately 30 × 11 × 15 cm and has a large carrying handle, making it easier to lift and move with a greater distance from the capture chamber. It can be used indoors and in protected outdoor areas where there are signs of rodent activity.

Key Benefits

• Designed for the live capture of rats, mice, and other rodents of suitable size.
• Sensitive trigger mechanism activates the door when the animal moves into the trap.
• Automatic door limits the animal’s ability to leave the capture chamber again.
• The construction is designed for continuous capture of multiple rodents over time.
• Separate bait chamber makes refilling more manageable.
• Galvanised metal construction for repeated use.
• Perforated sides provide ventilation and a visible capture chamber.
• Large carrying handle makes the trap easier to lift and transport.
• Does not require electricity, batteries, or chemical pesticides.
• Can be used indoors and in protected outdoor areas.
• Compact dimensions of approximately 30 × 11 × 15 cm.

Overview

This rat trap for live capture combines a mechanical trigger system with a closed and ventilated capture chamber. The bait is placed in the separate chamber, after which the trap is set on a stable surface along a wall or other known route for rodents.

When an animal moves in and activates the mechanism, the door closes automatically. The inward-opening design allows the entrance to continue functioning while an already captured animal is kept inside. The trap is therefore designed for continuous capture, but the actual number of captures depends on placement, activity, bait, and regular checks.

The perforated metal allows for viewing the contents without opening the trap. At the same time, the openings provide airflow around the capture chamber.

Dimensions and Specifications

Product Type	Reusable Cage Trap For Live Capture
Suitable For	Rats, mice, and other rodents of suitable size
Length	Approx. 30 cm
Width	Approx. 11 cm
Height	Approx. 15 cm
Material	Galvanised metal
Door Function	Automatic closing door with mechanical trigger
Trigger	Sensitive mechanism located inside the trap
Bait Chamber	Separate and accessible from the top of the trap
Capture Function	Designed for continuous live capture
Ventilation	Perforated sides and top
Handling	Integrated carrying handle
Power Supply	Does not require electricity or batteries
Usage	Home, basement, garage, storage, workshop, shed, and protected outdoor areas
Package Contents	1 Rat Trap

Note: There may be slight deviations in measurements due to manual measurement.

Sensitive Trigger and Automatic Closing Door

Inside the trap is a mechanical trigger that activates when the animal moves towards the bait. The mechanism causes the door to close, preventing the animal from going directly back through the entrance.

The system operates without electrical components, batteries, or power connection. Check before use that the trigger and door can move freely, and that no packaging debris, dirt, or bait is blocking the mechanism.

The trap’s function should be tested carefully without animals before it is placed in the desired location.

Designed for Continuous Capture

The door’s design allows the entrance to open inwards, even if an animal is already inside the capture chamber. This means that multiple rodents can move in over time while the captured animals are kept inside.

This function is useful in areas where there is activity from multiple rodents. However, the trap should be checked frequently and must not be left unattended for long periods.

The capture result depends, among other things, on:

• The trap’s placement
• The choice and freshness of bait
• The activity level in the area
• Whether the entrance is unobstructed
• Whether the trigger mechanism is functioning correctly
• How often the trap is checked and reset

Separate Chamber for Bait

The bait is placed in the separate chamber on the top of the trap. This design makes it easier to fill the trap with bait without having to reach through the entrance or far into the capture chamber.

The bait should be placed so that the animal has to move fully in and pass the trigger mechanism. Use a smaller amount so that the food does not fall into the door or block the moving parts.

Suitable baits can include:

• Nuts or nut butter
• Seeds and grains
• Cereal products
• Dried fruit
• Smaller pieces of fresh fruit
• Other bait suitable for the activity in the area

Regularly replace the bait to prevent it from becoming dry, mouldy, or attracting insects.

Galvanised Metal Construction

The trap is made of galvanised metal. The surface treatment gives the metal better resistance to common moisture and wear than untreated metal.

The construction has perforated openings on the sides and top. This allows for airflow and makes it possible to check whether the trap has captured an animal.

Galvanisation does not mean that the trap should be left permanently in heavy rain or water. For outdoor use, it is recommended to place it under an overhang, in a shed, or in another protected area.

Large Carrying Handle

The integrated handle allows the trap to be lifted from the top. This creates a greater distance between the hand and the capture chamber than lifting directly around the sides of the cage.

Always use work gloves when handling, and keep fingers, face, and loose clothing away from the openings. A captured animal may be stressed and may attempt to bite or scratch through the perforations.

Lift the trap calmly and horizontally, so it does not tip unnecessarily during transport.

Placement Along Walls and Fixed Routes

Rodents often move along walls, panels, fences, boxes, and other fixed edges. Therefore, the trap should be placed along a route where activity has been observed.

Signs of rodents can include:

• Droppings
• Gnaw marks
• Damaged packaging
• Tracks or greasy marks along walls
• Holes or tunnels
• Sounds from walls, ceilings, or storage areas

Place the trap on a flat and stable surface. Ensure that the entrance is not blocked and that the door has space to move freely.

Suitable for Multiple Areas

The trap can be used in various indoor and protected outdoor environments, including:

• Basement
• Garage
• Workshop
• Storage
• Shed
• Loft
• Around waste and storage areas
• Protected areas near buildings

Do not place the trap in a location where children, dogs, cats, or other animals can easily access it.

How to Prepare the Trap

1. Check the trap for transport damage, sharp edges, and loose parts.
2. Test that the door and trigger mechanism move freely.
3. Open the separate bait chamber on the top.
4. Place a small amount of bait in the chamber.
5. Close the bait chamber and check that it is seated correctly.
6. Prepare the trigger mechanism according to the included instructions.
7. Place the trap along a wall or known route for rodents.
8. Ensure that the entrance is open and unobstructed.
9. Check the trap frequently.

Control and Handling

A live capture trap should be checked frequently. A captured animal should not remain in the trap unnecessarily long or be exposed to extreme heat, cold, rain, or direct sunlight.

Use protective gloves for all handling, and avoid direct contact with the animal, urine, droppings, and other residues.

In Denmark, observations or signs of rats should be reported to the municipality. Handling a captured rat should be done according to the municipality’s or an authorised pest control expert’s instructions.

Cleaning and Recycling

The trap can be reused after proper emptying and cleaning. Use gloves and avoid direct contact with residues in the capture chamber.

Here’s how to clean the trap:

1. Remove residues of bait.
2. Rinse the trap’s interior and exterior surfaces.
3. Use a suitable cleaning agent as needed.
4. Clean particularly around the trigger, door, and bait chamber.
5. Rinse the cleaning agent thoroughly away.
6. Allow the trap to dry completely before reuse or storage.

Store the trap in a dry place so that moisture does not affect the mechanism or metal parts over time.

Combine Capture with Prevention

A rat trap does not remove the cause of rodents residing in the area. Therefore, capture should be combined with preventive measures.

It may be useful to:

• Store food and pet food in closed containers.
• Remove spilled food and food scraps.
• Keep waste containers properly closed.
• Remove debris and hiding places around the building.
• Seal relevant openings and conduits.
• Check drains, pipes, and ventilation openings.

In case of persistent or extensive activity, the municipality or a professional pest controller should be contacted.

Reusable Trap for Live Capture

This rat trap with automatic door is a mechanical solution for the live capture of rats, mice, and other rodents of suitable size.

The combination of a sensitive trigger, automatic closing door, separate bait chamber, perforated metal construction, and carrying handle makes the trap practical for repeated use indoors and in protected outdoor areas.