Retractable Wall-Mounted Clothes Rail Without Drilling – 22.5 cm

This retractable clothes rail provides a space-saving solution for hanging clothes, hangers, towels, and smaller accessories. It is mounted horizontally on a suitable wall and can be collapsed when not in use. The telescopic function allows the length to be adjusted from approximately 11 cm to 22.5 cm, so the rail can be adapted to the current task and available space.

The product combines a round wooden wall plate with a metal rail. The installation is carried out without drilling using the self-adhesive back. This makes the clothes rail useful in the wardrobe, hallway, bathroom, utility room, or on a covered balcony, where an extra hanging point is wanted without permanent screw fastening.

Key Benefits

• Telescopic rail can be adjusted from approximately 11 to 22.5 cm.
• Can be pushed against the wall when the hanging space is not in use.
• Installed without drilling on suitable, smooth, and clean surfaces.
• Suitable for clothes, hangers, towels, and lighter accessories.
• Round wall plate provides a total contact surface against the substrate.
• Compact design utilises wall space in smaller rooms.

Overview

This retractable wall-mounted clothes rail functions as a simple hanging point that can be extended as needed. In the folded position, the rail protrudes approximately 11 cm from the wall. When the telescopic joints are pulled out, a total length of approximately 22.5 cm is achieved. The end piece helps to prevent hangers from sliding off during normal use.

The rail can be used as a supplement to a wardrobe rail when today’s clothes need to be hung ready, or when individual hangers need to be aired. In the bathroom, it can be used for towels or light textiles, provided the surface is suitable for the adhesive installation. In the hallway, it can be used for smaller garments, while in the utility room it can create temporary hanging space for drying and organising.

The product images show a load of up to 2.5 kg. However, the actual load capacity depends on the wall material, cleanliness, installation, and how long the adhesive surface has been allowed to cure. The load should be distributed evenly, and the rail should not be used for heavy objects or as a support handle.

Specifications

Suitable Wall Surfaces

The adhesive installation is intended for solid, smooth, and clean surfaces. The product material shows, among other things, marble, wood, smooth glass, frosted glass, ceramic tiles, and smooth metal as suitable substrates. The installation is not intended for porous or uneven surfaces such as drywall, raw cement walls, or wallpaper.

The surface must be clean, dry, and free from grease, dust, and soap residues. On wood, the surface should be smooth and sealed so that the adhesive surface can make uniform contact. Always check the substrate in a discreet area if you are unsure whether the adhesive will affect the surface.

Installation and Use

First, thoroughly clean the chosen area and allow it to dry completely. Remove the protective film from the mounting surface, place the wall plate in the desired position, and press it firmly for about 5-8 seconds. The product material recommends that the rail remains unloaded for 24 hours before use.

Gently pull the rail out to the desired length, and then hang hangers or lighter textiles on it. Avoid lateral loads, sudden jerks, and overloading. Regularly check that the wall plate remains securely attached, especially in rooms with moisture or temperature fluctuations.

A practical solution for those who want extra hanging space without drilling and without taking up more space than necessary.