Flexible Drill Extension For Drill – 4 Pcs.

This flexible drill extension makes it easier to work with screws in narrow, deep or angled areas where a drill or electric screwdriver cannot be directly manoeuvred. The flexible shaft transfers the rotation from the machine to the mounted bit, allowing you to work around corners, behind edges, and inside cabinets. The set includes four extensions, each measuring approximately 29.5 cm.

Key Benefits

• Flexible design provides access to screws in hard-to-reach places.
• Can be bent in various directions during use.
• Standard hex connection for compatible drills and screwdrivers.
• Internal shaft transfers rotation while the external casing can be held steady.
• Suitable for installation in cabinets, drawers, furniture, and other tight spaces.
• Supplied as a set of four flexible drill extensions.

Overview

This flexible drill extension acts as a connector between the drill and the chosen screw bit. One end attaches to the machine’s chuck or bit holder, while the bit is mounted at the opposite end. When the machine is activated, the internal shaft rotates and transfers the movement to the screw.

The flexible construction allows the tool to be manoeuvred through areas where a standard, rigid bit extension cannot be positioned correctly. This could include inside a cabinet, behind a drawer rail, under a worktop, or close to a side wall. The extension thus provides greater freedom of movement for smaller installation and repair tasks.

For Work in Narrow and Angled Areas

When assembling furniture or installing fittings, screws may be located close to edges and internal corners. Here, the machine itself may take up too much space to align with the screw. The flexible shaft can be bent between the machine and the fastening point, allowing the bit to be positioned more accurately.

The shaft can be shaped into both gentle curves and sharper bends. It can therefore be used for tasks with various working angles. It is important to keep the bit end correctly positioned in the screw head and to work carefully so that the bit does not slip during rotation.

Simple Connection

The extension has a hex connection that attaches to a compatible drill or electric screwdriver. The bit end is designed for suitable screw bits with a hex shank. Before use, both ends must be securely attached, and the machine should be turned off while parts are being mounted or replaced.

During work, the external casing can be supported with the hand while the internal shaft rotates. The hand should be kept away from the rotating connections and the mounted bit. Start with a controlled speed so that the positioning and bending can be monitored before continuing with the work.

How to Use the Extension

First, attach the hex end to the tool, and then insert a suitable bit into the holder. Shape the shaft according to the access route before starting the machine. Ensure that the bend is not pressed against sharp edges and that the bit and screw are correctly aligned. Use both hands to control the machine and the extension during the task.

Practical for Assembly and Repair

The set can be used when installing hinges, fittings, drawer rails, handles, and other parts where the workspace is limited. It is also handy for maintenance in cabinets, shelves, kitchen units, and similar constructions.

With four extensions in the package, multiple toolboxes can be equipped, or extra units can be stored for later use. The compact size makes them easy to carry among bits and other hand tools.

Specifications

Contents of the Package

The package contains four flexible drill extensions. Drill, electric screwdriver, screw bits, screws, and other tools are not included.