Self-Adhesive Door Handle Lock with Double Push Button

This self-adhesive door handle lock helps limit the operation of compatible door handles. The lock is mounted around the handle and has two pivoting arms that can be placed above and below the grip, preventing it from being pressed down easily.

When the door needs to be used normally, the arms are released by operating the two push buttons simultaneously. The self-adhesive installation requires no drilling, screws, or tools, making the product suitable for homes where permanent changes to the door are not desired.

Key Benefits

• Limits the operation of compatible door handles.
• Two pivoting arms are placed above and below the handle.
• The arms can be rotated approximately 90° as needed.
• Double push button makes the lock less easy to open accidentally.
• Self-adhesive installation without drilling or screws.
• No tools required for installation.
• Can be set to an open position when the handle needs to be used freely.
• Made of plastic for general indoor use.
• Fits several types of compatible horizontal door handles.
• Supplied as 1 complete door handle lock.

Overview

This drill-free door handle lock consists of a self-adhesive base and two movable locking arms. The base is mounted on the door around the handle’s rose or bracket, while the arms are positioned to limit the movement of the handle.

When the arms are on either side of the handle, the grip cannot be pressed down normally. To release the handle, the two push buttons of the lock are operated simultaneously, after which the arms can be rotated away.

The pivoting design means that the lock can remain mounted even if the handle needs to be used freely temporarily. The arms are simply rotated away from the grip and returned to the locked position after use.

The product functions as an additional access restriction. It is not a burglar-proof door lock and does not replace a standard lock cylinder, key lock, or other approved security.

Specifications

Product Type	Self-Adhesive Lock for Door Handle
Material	Plastic
Number of Locking Arms	2
Movement	The arms can be rotated approximately 90°
Unlocking	Simultaneous operation of two push buttons
Installation	Self-adhesive installation without drilling
Tools	Not required
Suitable Handles	Compatible horizontal door handles with sufficient space around the bracket
Suitable Surfaces	Flat, clean, dry, and solid door surfaces
Usage	Extra limitation of the operation of interior door handles
Package Contents	1 self-adhesive door handle lock

Double Push Button for Unlocking

The lock has a push button at each of the two pivoting arms. To move an arm, the relevant operating points must be activated correctly so that the arm can be rotated away from the door handle.

The operation with two push points makes the mechanism less easy to open with an accidental push or pull. An adult can simultaneously release the handle without the use of a key or tools.

Here’s how to release the handle:

1. Hold the lock’s base steady with one hand.
2. Operate the two push buttons as shown on the product.
3. Rotate the upper arm away from the handle.
4. Rotate the lower arm away from the handle.
5. Check that the handle can now be moved freely.

Do not operate the arms with excessive force. If an arm does not move, check that the buttons are pressed correctly.

Pivoting Arms with Approximately 90° Movement

The two arms can be rotated between a locking and an open position. In the locking position, they are placed around the door handle, preventing the handle from being moved normally.

When the door needs to be used repeatedly, the arms can be rotated away and left in the open position. Therefore, the lock does not need to be removed from the door for normal access.

The pivoting function can be used for:

• Activating the lock when the door needs to be kept less accessible.
• Temporarily releasing the handle.
• Allowing the lock to remain in place between uses.
• Adjusting the arms to the handle’s position.

Ensure that the arms do not hit the wall, door frame, or other fittings when the door is opened and closed.

Installation Without Tools

The lock is attached with a self-adhesive backing. Therefore, no holes need to be drilled or screws installed in the door.

The adhesive installation works best on a flat, solid, and smooth surface. Dust, grease, moisture, loose surface layers, and heavy texture can reduce adhesion.

Suitable mounting surfaces can include:

• Smooth and lacquered door surfaces.
• Flat surfaces around the door handle’s fittings.
• Solid surfaces without cracks or loose materials.
• Doors with sufficient free space around the handle.

The product should not be mounted on rough, porous, damaged, or damp surfaces. The adhesive may leave residues or affect delicate surfaces upon later removal.

How to Install the Door Handle Lock

1. Check that the lock fits around the chosen door handle.
2. Temporarily place it against the door to find the correct position.
3. Ensure that both arms can be placed above and below the handle.
4. Clean the mounting area of dust, grease, and dirt.
5. Allow the surface to dry completely.
6. Remove the protective film from the self-adhesive backing.
7. Place the lock precisely around the handle.
8. Press the entire base firmly against the door for about 10 seconds.
9. Allow the adhesive to set before loading the arms.
10. Gently test the locking and unlocking function.

Follow any accompanying instructions regarding curing time. The adhesive should not be subjected to full load immediately after installation.

Check Compatibility Before Installation

The lock is designed for horizontal door handles, but door handles can vary significantly in shape, length, thickness, and distance to the door.

Before installation, check that:

• There is space for the lock’s base around the handle fitting.
• Both arms can reach around the grip.
• The arms can be rotated without hitting the door frame.
• The handle does not have a shape that slips past the locking arms.
• The lock can be mounted on a flat surface.
• The door can still be opened fully without obstruction.

The product may not be compatible with round door knobs, very short grips, heavily curved handles, or fittings with limited space around them.

How to Activate the Lock

1. Close the door completely.
2. Check that the handle is in its normal position.
3. Rotate the lower arm under the door handle.
4. Rotate the upper arm over the door handle.
5. Check that both arms are locked in position.
6. Gently press the handle to check the locking.

Avoid pulling hard on the handle during the test. The product should be checked with moderate force to ensure that the installation does not loosen.

For Interior Doors in the Home

The door handle lock can be used on compatible interior doors where an extra limitation of the handle’s operation is wanted.

Possible locations can include:

• Doors to storage rooms.
• Doors to offices or workspaces.
• Doors to wardrobes and other rooms.
• Other interior doors with compatible grips.

The product should not be used on doors that need to be opened quickly in an emergency.

Regular Check of the Adhesive Installation

Self-adhesive fastening can be affected by temperature, moisture, cleaning agents, and repeated loading. The installation should therefore be checked regularly.

Check for:

• The base still sits tightly against the door.
• There are loose edges around the adhesive surface.
• The arms lock correctly in both positions.
• The push buttons move without resistance.
• The plastic parts have cracks or deformations.
• The door’s surface has started to loosen.

Stop using the product if the lock is loose, damaged, or no longer limits the handle as expected.

Important Safety Information

The product is an additional door handle limiter and not an approved burglar lock. It does not necessarily prevent a person from opening the door, removing the product, or breaking the adhesive installation.

The lock does not replace:

• A standard door lock or lock cylinder.
• Supervision of children or other individuals.
• A professionally installed access security.
• Approved security for external doors.
• Fire and escape route security.

Do not mount the product on fire doors, emergency exits, or other doors where quick opening may be necessary. All adults in the household should know how to release the lock.

Cleaning and Maintenance

Wipe the lock with a dry or slightly damp, soft cloth. Use only a small amount of mild cleaning agent if necessary.

Avoid:

• Spraying cleaning agent directly on the adhesive edges.
• Scouring sponges and hard brushes.
• Solvents and strong chemicals.
• Large amounts of water around the self-adhesive base.
• Oil or lubricant on buttons and adhesive surfaces.

Check the installation after cleaning, and ensure that the arms still move correctly.

Practical Door Handle Lock Without Drilling

This self-adhesive door handle lock with double push button combines two pivoting locking arms with tool-free installation. The arms can be placed around a compatible door handle and rotated away again when the door needs to be used normally.

The product is supplied as 1 piece and must be mounted on a clean, dry, and stable surface. Door handles and other shown items are not included.