Bike Mirror For Handlebars With Anti-Glare And 360° Rotation

This bike mirror for handlebars allows you to keep an eye on traffic approaching from behind without constantly having to turn your upper body. The mirror is mounted directly around the bicycle handlebar and can be adjusted in multiple directions, so the viewing angle can be tailored to the bike, riding position, and desired location.

The wide mirror surface measures approximately 10.5 × 7 cm and is designed to provide a clear and broad view behind. The anti-glare treated surface helps to reduce annoying glare from sunlight, streetlights, and car headlights.

The bike mirror is available in three variants: left, right, and right + left. It can therefore be mounted on one side of the handlebar or used as a complete set with mirrors on both sides.

Key Benefits

• Handlebar-mounted bike mirror for better visibility of traffic behind.
• Anti-glare treated mirror surface helps to reduce annoying glare.
• The mirror can rotate 360°, allowing for individual adjustment of the viewing angle.
• The adjustable arm can also be rotated and set according to the riding position.
• Telescope extension of up to approximately 50 mm.
• Wide mirror surface of approximately 10.5 × 7 cm.
• Fits handlebars with a diameter of approximately 20–23 mm.
• Can be used on regular bikes, mountain bikes, and e-bikes with compatible handlebars.
• Mounted with a clamp around the handlebar.
• Mounting screw and Allen key included.
• Available as left, right, or complete set with both sides.
• Each mirror weighs approximately 101.8 g.

Overview

This adjustable bike mirror is developed for cyclists who want a fixed rearview mirror mounted close to the handle. The mirror allows for checking the area behind the bike while riding and can be practical in city traffic, on country roads, and on bike paths with many users.

The mirror surface has an asymmetric, wide design, which provides a larger field of view than many smaller and round bike mirrors. The anti-glare treated surface dampens strong light reflections while still maintaining a clear mirror image.

Both the mirror surface and the arm can be adjusted. This allows the mirror to be placed higher, lower, further out to the side, or closer to the handlebar, depending on the bike’s setup.

Variants

Measurements and Specifications

Note: Measure the diameter of the bicycle handlebar at the desired mounting location before ordering. The mirror is intended for handlebars with a diameter of approximately 20–23 mm.

Wide Mirror Surface For Rear View

The mirror surface measures approximately 105 mm in width and 70 mm in height. The wide shape is designed to provide a larger view of the area behind the bike than a smaller, round mirror.

The mirror can be adjusted so that approaching cyclists, cars, and other road users become visible from the chosen riding position. The precise viewing angle depends on the placement on the handlebar, the cyclist’s height, and the mirror’s setting.

Always adjust the mirror while the bike is stationary, before starting to ride.

Anti-Glare Treated Mirror

The mirror surface has a treatment that helps to dampen strong light reflections. This can make visibility more comfortable when riding in direct sunlight or when encountering strong light sources.

The anti-glare treatment does not eliminate all reflections and does not replace the need for general attention in traffic. Light conditions, weather, and the angle of the mirror can affect how clearly the area behind appears.

Regularly clean the mirror so that dust, water spots, and dirt do not limit visibility.

360° Adjustable Mirror Surface

The mirror surface is mounted in a movable joint, which can be rotated and tilted in multiple directions. This allows the mirror to be adjusted according to the individual bike and riding position.

The mirror can be rotated:

• Up or down
• In towards the bike
• Out from the handlebar
• Forward or backward
• All around in a full 360° adjustment

Once the desired angle is found, all joints should be checked and tightened, so the mirror does not move unnecessarily during riding.

Telescopic Arm With Up To 50 mm Adjustment

The mirror arm has a telescopic section that can be extended by up to approximately 50 mm. By loosening the adjustment ring, the mirror can be moved further out from the handlebar or back towards the bike.

The telescopic function is practical if the cyclist’s arm or shoulder otherwise occupies a large part of the mirror image. By extending the mirror further out, the field of view behind the bike can be improved.

After adjustment, the locking ring should be tightened correctly to keep the arm in the chosen position.

For Handlebars With A Diameter Of 20–23 mm

The mounting clamp is designed for a round handlebar with a diameter of approximately 20–23 mm. The mirror is mounted around the handlebar close to the grip, gear shifter, or brake, depending on where there is sufficient space.

Measure the handlebar with a caliper or suitable measuring tool before ordering. A handlebar can have different diameters at different points, and the measurement should therefore be taken precisely where the mirror is to be mounted.

The product should not be forced onto a handlebar that is thicker or thinner than the specified compatibility.

Mounting On The Bicycle Handlebar

1. Select the left or right side of the handlebar.
2. Measure the diameter of the handlebar at the mounting location.
3. Loosen the screw in the mounting clamp with the included Allen key.
4. Place the clamp around the handlebar.
5. Move the mirror so that it does not block the brake lever, gear shifter, or cables.
6. Evenly tighten the mounting screw.
7. Adjust the length and angle of the arm.
8. Rotate the mirror surface until the area behind the bike is clearly visible.
9. Check that all screws and adjustment joints are stable.
10. Test the mirror at low speed before using it in regular traffic.

Do not tighten the screw unnecessarily hard, as this may damage the mounting bracket or bicycle handlebar.

Left Or Right Placement

The left variant is designed for mounting on the left side of the handlebar, while the right variant is mirrored and intended for the right side.

The choice depends on which side provides the best visibility in the current riding situation. Many choose a mirror on the left side, while others prefer the right side or a complete set with both mirrors.

The right + left variant allows for checking traffic behind the bike from both sides.

For Regular Bike, Mountain Bike, And E-Bike

The bike mirror can be used on several types of bikes when the handlebar diameter and mounting area fit the bracket. It can be useful for:

• Regular everyday bike
• E-bike
• Mountain bike
• City bike
• Hybrid bike
• Trekking bike
• Commuter bike

Check that there is sufficient space between the grips, brake levers, gear shifters, display, and other equipment.

Cleaning And Maintenance

The mirror surface can be cleaned with a soft microfiber cloth. If necessary, the cloth can be lightly dampened with water or a mild cleaning agent designed for mirrors.

Avoid coarse sponges, abrasive cleaners, and sharp tools, as they can scratch the surface or damage the anti-glare treatment.

Regularly check:

• The mounting screw
• The clamp around the handlebar
• The telescopic joint
• The mirror surface’s pivot joint
• Plastic parts and joints

Tighten loose parts before further riding. Do not use the mirror if the holder, mirror surface, or mounting clamp is damaged.

Extra Overview While Cycling

This bicycle rearview mirror with anti-glare is a practical solution for cyclists who want a fixed view of the area behind the bike.

The combination of a wide mirror surface, 360° rotation, telescopic arm, and mounting for handlebars of 20–23 mm makes the mirror flexible for different types of bikes and riding positions.

A bike mirror is a supplement to regular awareness and does not replace the need for the cyclist to look back and check the blind spot before turning, overtaking, or changing position.