Cat Flap With 4-Way Lock For Door And Glass – 2 Sizes

This cat flap with 4-way lock regulates the cat’s passage through a compatible door or glass panel. The round design consists of two frame parts that come together around the opening, while the swinging flap moves as the cat goes through. The model can also be used for smaller dogs, provided the animal’s measurements fit.

The cat flap is available in 30 x 30 x 2 cm and 40 x 40 x 4 cm. The lock can be set for free passage, full blocking, entry only, or exit only. Access can thus be changed as needed without electricity or batteries.

Key Benefits

• Four settings provide flexible control over entry and exit.
• Free passage allows movement in both directions.
• Full blocking keeps the flap closed from both sides.
• The one-way functions allow either entry only or exit only.
• The magnet helps the flap return after passage.
• The brush edge dampens contact between the flap and the frame.
• Round construction for compatible doors and glass panels.
• Available in two sizes for different installations.

Four Locking Options

The locking system is operated next to the flap. In the open position, the pet can pass both ways, while the closed position blocks in both directions. The other two settings only open one way, allowing the cat to either come in without going out again or go out without being able to come in.

Test the setting by gently moving the flap with your hand. Ensure that the desired direction is clear and that the opposite is blocked before the cat flap is put into use.

Magnetic Closure and Brush Edge

A magnet at the bottom of the frame helps the flap return to the exit position. This function requires the frame to be flush so that the flap can move without hitting the sides.

The brush edge follows the sides and top of the flap. It reduces noise upon contact with the frame and provides a softer edge around the passage. Regularly remove hair and dirt to ensure the flap can continue to move freely.

Sizes and Variant Selection

Measure the pet’s widest point and the height from under the belly to the ground. The cat should be able to pass without pressing its body against the frame. The product material indicates the shown model is for cats and smaller dogs up to approximately 6 kg, but the size should be chosen based on the animal’s actual measurements.

For the model at 30 x 30 cm, the guide shows a round cut-out hole of approximately 27 cm. The hole measurement for the model at 40 x 40 cm is not clearly stated. Therefore, check the template or measure the product before cutting.

Installation In Door Or Glass

The product material shows installation in glass windows, glass doors, and sliding doors. A precise round hole is necessary, and work in glass should be carried out by a professional. Always check glass type and installation options before ordering or installing the product.

For other door materials, thickness, stability, and space around the cut-out should be checked. The frame parts are placed on either side and assembled with screws. Install the unit level so that the flap and magnet can function correctly.

Product Specifications

How To Prepare The Installation

1. Measure the pet and choose the appropriate variant.
2. Check the installation surface and the required hole size.
3. Mark the opening at a height suitable for the animal.
4. Have the hole cut using a method suitable for the material.
5. Assemble the frame parts and check the flap’s movement.
6. Test all four locking settings before use.

Package Contents

The package contains 1 cat flap with two-part frame as well as mounting screws and screw caps as shown in the product material. Tools and professional glass installation are not included as part of the package.