Dart Mat With Throw Lines For Steel And Soft Tip Darts

This dart mat makes it easier to set up a fixed and clear area in front of the dartboard. The mat measures 250 x 30 cm and has clearly printed throw lines for both steel tip darts and soft tip darts. It is placed on the floor from the dartboard out towards the player, so the correct throwing distance can be quickly found. At the same time, it serves as a protective surface in the area where darts typically land if they miss or fall out of the board.

Key Benefits

• Printed throw lines at 237 cm for steel tip darts and 244 cm for soft tip darts.
• Measurements of 250 x 30 cm provide a long surface in front of the dartboard.
• Helps protect the floor from marks and wear from fallen darts.
• Makes it easy to find and reuse the same throwing position.
• Can be rolled up when the dart area is not in use.
• Made with a polyester fibre surface and requires no batteries.

Overview

A correctly measured throwing distance is important for the dart game to feel consistent from round to round. With this dart mat with throw lines, you do not need to measure the floor before each game session. The mat has separate markings for the two common playing styles: 237 cm for steel tip darts and 244 cm for soft tip darts. You can therefore place your feet at the relevant line and focus on the throw.

The long, narrow design is intended to lie directly in front of the dartboard. The mat covers the area from the wall and forward towards the throwing position, creating a clear path in the room. This makes it suitable for dart areas in the home, hobby room, club, office, or other places where the dartboard is used regularly.

Specifications

Fixed Throw Distances For Two Types Of Darts

The two printed distance markings make the mat usable with both traditional dartboards for steel tips and electronic dartboards for soft tip darts. The markings are placed close to the end of the mat, providing the player with a visible reference to the toe line. This reduces the need for loose tape markings on the floor and helps keep the throwing point consistent when multiple people play in succession.

Protective Surface In Front Of The Dartboard

Darts do not always hit the board. A dart can fall out, hit below the board, or land on the floor after contacting another dart. The mat lays an extra layer between the dart area and the floor surface. It can therefore help limit marks in the area that is most exposed during play. The elongated shape protects along the natural throwing line without taking up unnecessary floor space on the sides.

Easy Placement In The Dart Area

To achieve a clear and practical setup, the mat is laid with one end close to the wall under the dartboard and the throw lines facing the player. The total length of 250 cm allows space for both markings within the same surface. Thus, the dart area can switch between steel tip and soft tip play without needing to replace the mat or measure the floor again. The narrow width also makes it simple to place the mat in rooms where space around the dartboard is limited.

Practical For Permanent And Temporary Dart Areas

The mat can be used as a permanent part of a designated dart area or laid out as needed. When the game is over, it can be rolled up and stored, freeing the floor again. There is no assembly, electronics, or batteries to prepare. Place the mat directly out from the dartboard, ensure it lies flat, and then choose the throw line that suits the type of darts being used.

This dart mat measuring 250 x 30 cm combines floor protection and clear throwing distances into a single accessory for dart play.