Self-Watering Spikes For Potted Plants – 6 Pcs.

These self-watering spikes for potted plants help to gradually supply water to the soil around the plant’s roots. Each spike consists of a decorative water reservoir and a narrow tip, which is placed directly into the potting soil. The set includes six spikes and is suitable for houseplants, flowers, herbs, cuttings, and smaller plants at home.

The reservoir is filled with water, after which the spike is inserted into moist soil. Water is released continuously through the tip, allowing the plant access to moisture over several days. The product requires no electricity, batteries, hoses, or connection to a tap, making it a simple solution during work, weekend trips, and short travels.

Key Benefits

• The set includes six self-watering spikes for multiple potted plants.
• Gradually supplies water directly into the soil around the roots.
• Can support watering for approximately 3-7 days after filling.
• Water supply can be affected by changing the angle of the spike in the soil.
• Requires no electricity, batteries, hoses, or technical installation.
• Suitable for houseplants, flowers, herbs, and cuttings.
• Can be refilled and reused for daily plant care.

Overview

A self-watering spike functions as a small water reservoir that is placed directly in the pot. When the reservoir is filled, water slowly moves down through the spike and into the soil. This makes the solution practical for plants that need access to moisture while you cannot water them every day.

The set can be distributed among six different pots or used with multiple spikes in larger containers. This allows for customising the setup according to the plant’s size, soil volume, and water needs. The watering period is influenced by factors such as soil dryness, room temperature, the plant’s consumption, and the angle at which the spike is placed.

The spikes have a total length of approximately 24 cm. The long tip helps to direct the water down into the potting soil while providing a stable placement when the soil is sufficiently firm. The decorative shape makes them suitable for visible use in windowsills, on shelves, and in plant displays.

Specifications

Gradual Watering At The Plant’s Roots

When the spike is placed in the soil, water is directed closer to the plant’s root zone than with regular watering from above. This can be practical in pots where the soil surface dries quickly, or where leaves and stems make it difficult to pour water directly into the pot.

The system is not electronic and does not measure soil moisture. Water is distributed using the reservoir, the soil’s absorbency, and the spike’s placement. Therefore, start with moist soil so that the water does not leave the reservoir too quickly immediately after installation.

Adjust Water Supply With Placement

The angle of the spike can be used to influence how quickly the water moves out into the soil. A more vertical placement is shown to provide a slower supply, while a more angled placement can increase the speed. Adjust the angle carefully and check the water level after a few hours.

Plants have different needs. A small plant in dense soil typically uses less water than a larger plant in a light soil mix. Therefore, test the system while you are at home before using it during a trip. This way, you can find a placement that suits each pot.

Easy Filling And Installation

Water the reservoir’s soil normally before installation. Then fill the water reservoir and gently push the tip down into the soil. Avoid pressing the spike against hard roots, stones, or a compact bottom, as the tip may become stressed. The soil can be loosened slightly with a plant stick if it is very firm.

Place the spike with distance from the plant’s main stem. The reservoir should stand stable and must not hang over the edge of the pot. After installation, check that no water is leaking around the opening and that the spike is not loose in the soil.

Practical For Absences And Busy Periods

The self-watering spikes can be used when plants need care during a weekend trip, workday, or short holiday. They can also be part of regular plant care if you want a more gradual water supply between normal waterings.

A filling is indicated for approximately 3-7 days of watering. The period may be shorter in warm rooms, with dry soil, or for plants with high water consumption. Therefore, always check the reservoir’s level and the plant’s soil when you return home.

For Multiple Pots And Plant Displays

The six spikes can be distributed among pots in the windowsill, on the plant shelf, or in a smaller plant area. Each reservoir is filled separately, allowing the plants to receive water according to their placement and the soil’s needs.

Cleaning And Maintenance

Remove the spike from the soil and rinse both the reservoir and the tip with clean water. Use a soft brush or a thin cleaning stick if soil has accumulated in the opening. Avoid sharp tools that can scratch or damage the plastic.

Allow the parts to dry completely before storage. Check the tip for cracks and blockages before each use. For limescale deposits, the parts can be briefly placed in a mild mixture of water and household vinegar and then rinsed thoroughly.