Wireless Cat Water Fountain With Sensor – 2.6 Litres

This wireless cat water fountain provides the cat with access to circulating and filtered drinking water without needing to be permanently near a plug socket. The built-in motion sensor starts the water flow when the cat approaches, while the timer function activates the fountain at regular intervals. The container holds 2.6 litres, and the rechargeable 4000 mAh battery makes the model practical for the home, bedroom, and shorter periods where a cordless placement is advantageous.

Key Benefits

• Wireless design allows flexible placement without a fixed power cord.
• Motion sensor activates the water flow when the cat comes close.
• Timer function starts the water circulation automatically every 15 minutes.
• Four-layer filtration helps collect hair, particles, and impurities.
• Low water protection stops the pump when the water level gets too low.
• Transparent level window makes it easier to monitor the water amount.

Automatic Water Supply As Needed

The fountain has two operating modes, which are selected on the control module. In sensor mode, the infrared motion sensor detects when the cat approaches, after which the water begins to flow. This function limits unnecessary operation when the fountain is not in use. In timer mode, the water flow is automatically activated every 15 minutes, so the water circulates at regular intervals throughout the day.

The wide drinking bowl provides the cat with good access to the water and is designed so that the whiskers do not need to be pressed against narrow edges. The water is directed from the pump module and over the bowl, where the movement makes the drinking area clear and easily accessible.

Rechargeable Battery and Free Placement

The built-in battery has a capacity of 4000 mAh and is charged via USB. Once the battery is charged, the fountain can be placed on the floor, a stable shelf, or close to the cat’s preferred resting place without a permanent cord across the room. This makes the model usable in areas without a convenient plug socket and also reduces the risk of the cat playing with a power cord.

The fountain must be placed horizontally on a stable and dry surface. The control and battery module must not be submerged in water during cleaning or refilling.

Filtration and Pump Protection

The replaceable filter uses multiple layers to retain hair and smaller particles before the water is sent back through the system. Regular cleaning of the container, drinking bowl, filter area, and pump is necessary to maintain a steady water flow. The filter should be checked frequently and replaced at appropriate intervals depending on usage and water quality.

An integrated low water sensor detects when the water level becomes insufficient. The pump then automatically stops, and the indicator light alerts that the container needs to be filled. This function helps protect the pump from running without sufficient water.

Capacity for Daily Routine

The 2.6-litre water tank reduces the need for frequent refilling compared to a small water bowl, but the water should still be checked and replaced regularly. The level window on the side allows you to see how much water is left without having to lift the drinking bowl first. The detachable design also makes it easier to take the container to the sink, refill it, and reassemble the fountain.

For short trips, the water level, battery, and filter condition should be checked before departure, and the cat should always have an additional water source available.

Specifications

Cleaning and Maintenance

Turn off the fountain before cleaning, and disassemble the container, drinking bowl, filter, and pump parts. Wash the removable parts with mild washing-up liquid, rinse them thoroughly, and let them dry before reassembly. The control module should be wiped with a damp cloth and must not be placed in water. Only fill the container with clean drinking water, and check the water level daily.